top of page

Lathes

Browse by Manufacturer

Proturn-1.png
Proturn s1730.png
Proturn S1730
17" X 30" GEAR HEAD LATHE
  • Electrical cabinet with door safety lock.

  • C.S.A. approved

  • Single-phase (110V) coolant system.

  • Hand pump lubricator for bed ways and cross slide.

  • Feed stop bar with adjustable longitudinal stops.

  • Overload feed mechanism in carriage.

  • 8″ capacity rollersteady rest.

  • Roller follow rest.

  • Halogen work light.

  • Full length splash guard.

  • Quick change tool post with 6 Holders.

  • Foot brake.

  • Left hand carriage hand wheel

  • Inch/Metric dual dials.

  • 10″ Semi steel 3-Jaw chuck, SK type.


Swing over bed………… 17″

Center distance……….. 30″
Bed width………………… 12″
Swing over cross slide 9 1/2″

Swing in the gap………. 25 1/2″

Spindle nose……………. DI-8

Spindle bore…………….. 3 1/16″

12 Spindle speeds:…… 20 – 2000 R.P.M.

36 Inch threads……….. 4 – 56 T.P.I.

17 Metric threads……. 0.5 – 7.0mm

Longitudinal feeds… 002” – .032”/rev.

Cross feeds……………… .0008″ – .016″/rev.

Cross slide travel……… 10″

Tool post slide travel.. 5″

Lead screw diameter.. 1 3/8″ x 4 T.P.I.

Tailstock taper………… 4 MT

Tailstock quill …………. 2 1/4″

Quill movement………. 6 2″

Spindle motor………….. 7.5 H.P.

Machine weight………. 3695 Lbs.

PROTURN S1740.jpg
Proturn S1740
17" X 40" GEAR HEAD LATHE
  • Electrical cabinet with door safety lock.

  • C.S.A. approved

  • Single-phase (110V) coolant system.

  • Hand pump lubricator for bed ways and cross slide.

  • Feed stop bar with adjustable longitudinal stops.

  • Overload feed mechanism in carriage.

  • 8″ capacity rollersteady rest.

  • Roller follow rest.

  • Halogen work light.

  • Full length splash guard.

  • Quick change tool post with 6 Holders.

  • Foot brake.

  • Left hand carriage hand wheel

  • Inch/Metric dual dials.

  • 10″ Semi steel 3-Jaw chuck, SK type.
     

Swing over bed………… 17″

Center distance……….. 40″

Bed width…………………12″

Swing over cross slide 10″

Swing in the gap………. 25 1/2″

Spindle nose……………. DI-8

Spindle bore…………….. 3 1/16″

12 Spindle speeds:…… 20 – 2000 R.P.M.

36 Inch threads……….. 4 – 56 T.P.I

17 Metric threads……0,5 – 7.0mm

Longitudinal feeds… .002” – .032”/rev.

Cross feeds……………… .0008″ – .016″/rev.

Cross slide travel……… 10″

Tool post slide travel.. 5″

Lead screw diameter.. 1 3/8″ x 4 T.P.I.

Tailstock taper………… 4 MT

Tailstock quill diameter 2 1/4″

Quill movement………. 6 2″

Spindle motor………….. 7.5 H.P.

Machine weight………. 4195 Lbs.

s1760.jpg
Proturn S1760
17" X 60" GEAR HEAD LATHE
  • Rear mounted electrical cabinet with safety lock.

  • C.S.A. approved.

  • Single-phase (110V) coolant system.

  • Hand pump lubricator for bed ways and cross slide.

  • Feed stop bar with adjustable longitudinal stops.

  • Overload feed mechanism in carriage.

  • 8″ capacity roller steady rest.

  • Roller follow rest.

  • Halogen work light.

  • Full- length splash guard.

  • Quick- change tool post with 6 Holders.

  • Foot brake.

  • Left hand carriage hand-wheel

  • Inch/Metric dual dials.

  • 10 1/ 2″ Semi steel 3-Jaw chuck, SK type (top reversing jaws)
     

Swing over bed………… 17″

Center distance……….. 60″

Bed width………………… 12″

Swing over cross slide 9 1/2″

Swing in the gap………. 25 1/2″

Spindle nose……………. DI-8

Spindle bore…………….. 3 1/16″

12 Spindle speeds……. 20 – 2000 R.P.M.

36 Inch threads……….. 4 – 56 T.P.I.

17 Metric threads……. 0.5 – 7.0mm

Longitudinal feeds…. .002″ – .032″/min.

Cross feeds……………… .0008″ – .016″/min.

Cross slide travel……… 10″

Tool-post slide travel. 5″

Lead screw diameter.. 1 3/8″ x 4 T.P.I.

Tailstock taper………… 4 MT

Tailstock quill diameter                  2 1/4″

Quill movement………. 6 2″

Spindle motor………….. 7.5 H.P.

Machine weight………. 4,510 Lbs.

1990-1024x683.jpg
Proturn S1990
19" X 90" GEAR HEAD LATHE

​

  • Swing over bed 19”

  • Center distance 90”

  • Bed width 12”

  • Swing over cross slide 10 ¾’”

  • Swing in the gap 27 ½”

  • Spindle nose DI-8

  • Spindle bore 3 3/16”

  • 12 Spindle speeds: 40 – 1350 R.P.M.

  • 36 Inch threads 4 – 56 T.P.I.

  • 17 Metric threads 0.5 – 7.0mm

  • Longitudinal feeds 002” – .032”/min.

  • Cross feeds 0008” – .016”/min.

  • Cross slide travel 10”

  • Tool post slide travel 5”

  • Lead screw diameter 1 3/8” x 4 T.P.I.

  • Tailstock taper 4 MT

  • Tailstock quill diameter 2 ¼”

  • Quill movement 6”

  • Spindle motor 7.5HP

  • Machine weight 5,250 Lbs.

M2290.jpg
Proturn M2290
22" X 90" GEAR HEAD LATHE

• One piece MEEHANITE bed casting with hardened and ground bed-ways to Rc55 Rockwell.

• Alloy steel headstock gears and spline shafts are hardened and precision ground.

• German FAG high precision taper and roller bearings are used on the spindle to assure a roundness accuracy of .0001″ over a length of 8 Inches.

• The universal INCH/METRIC feed box makes it possible to cut both types of threads without changing gears.

• A Class V3 spindle motor is used in order to maintain vibration at 3 Microns.

• The spindle taper and shoulder are hardened and ground.

• The headstock, feed box and the apron have their own oil baths and the cross slide screw is in an oil bath

Swing over bed 22″
Center distance 90″
Bed width 13 3/4″
Swing over cross slide 13 1/3″
Swing in the gap 31″
Spindle nose DI-8
Spindle bore 4″
12 Spindle speeds 14 – 1380 R.P.M.
36 Inch threads 2 – 56 T.P.I.
17 Metric threads P 0.5-P 14
Long feeds .002″ – .032″/min.
Cross feeds .0001″ – .00094″/min.
Lead screw diameter 1 1/ ” x 4 T.P.I.
Tailstock taper 5 MT
Quill diameter 3″
Quill movement 6 ”
Spindle motor 10 H.P.
Cross slide travel 13 3/4″
Tool post slide travel 7.7/8″
Machine weight 6,060 Lbs.

L22100.jpg
Proturn L22100
22" X 90" LATHE
  • Rear mounted electrical cabinet with safety door lock.

  • C.S.A. approved electrical components for operation on 600/3/60 Volts.

  • Single-phase (110V) coolant system.

  • Lubricating pump for bed-ways and cross slide.

  • Feed stop bar with adjustable longitudinal stops.

  • Overload feed mechanism in carriage.

  • 12″ capacity Roller steady rest. Capacity 1 1/2” to 11 1/4”.

  • Roller follow rest. Capacity ¾” to 5 1/8”

  • Halogen work light.

  • Full length splash guard.

  • Quick change tool-post with 5 Holders.

  • Foot brake.

  • Left hand carriage hand wheel.

  • Rapid traverse on Z axis.

  • 2 speed tail stock with hand crank for easy displacement.

  • Cross feed screw and nut in an oil bath.

​

Swing over bed……………………………… 22″

Center distance……………………………… 100”

Width of bed……………………………… 16″

Swing over cross slide……………………………… 15″

Swing in the gap……………………………… 31″

Spindle nose……………………………… DI-11

Spindle bore……………………………… 4 1/2″

12 spindle Speeds…………15 – 1000 R.P.M.

36 inch threads…………….2 – 56 T.P.I.

17 Metric threads……… 0.5 – 7.0mm

Longitudinal feeds……………………………… .002″ – .032″/Rev. 

Cross feeds……………………………… .0008″ – .016″/Rev.

Lead screw diameter……………………………… 1 1/2″ x 4 T.P.I.

Tailstock taper……………………………… 5 MT

Tailstock quill diameter……………………………… 3 3/8″

Quill movement……………………………… 6 1/2″

Star-Delta start spindle motor…15 H.P.

Cross slide travel……………………………… 16″

Tool-post slide travel……………………………… 8″

Machine weight……………………………… 6,890 lbs

26120.jpg
Proturn L26120
26" X 120" LATHE
  • Rear mounted electrical cabinet with safety door lock.

  • C.S.A. approved

  • Single-phase (110V) coolant system.

  • Hand pump lubricator for bed-ways and cross slide.

  • Feed stop bar with adjustable longitudinal stops.

  • Overload feed mechanism in carriage.

  • Roller Follow rest. (3/4” – 5 1/8” cap.)

  • Halogen work light.

  • Full length splash guard.

  • Quick change tool-post with 5 Holders.

  • Foot brake.

  • Left hand carriage hand wheel.

  • Rapid traverse on Z axis.

  • 2 speed tail stock with hand crank for easy displacement.

​

Swing over bed………… 26″

Center distance……….. 120″

Width of bed…………… 16″

Swing over cross slide 17 1/4″

Swing in the gap………. 35″

Spindle nose……………. DI-11

Spindle bore…………….. 4 1/2″

12 Spindle speeds……. 10 – 1000 R.P.M.

36 Inch threads……….. 2 – 56 T.P.I.

17 Metric threads… .0,5 – 7.0 mm

Longitudinal feeds   002” – .032”/ rev.

Cross feeds……………… .0008″ – .016″/ rev.

Lead screw diameter.. 1 1/2″ x 4 T.P.I.

Tailstock taper………… 5 MT

Tailstock quill diam.   3 3/8″

Quill movement………. 6 2″

Spindle motor………….. 15 H.P.

Cross slide travel……… 16″

Tool-post slide travel. 8″

Machine weight………. 8,140 Lbs.

​

eziturn.jpg
Proturn Eziturn
LATHE
  • Swing over bed: 18 1/2”

  • Swing over cross slide: 11”

  • Cneter distance: 1500

  • Spindle nose: D1-6

  • Spindle bore : 58mm

  • Spondle speed: L=20-180 rpm

  • H=181-2000rpm

bottom of page